Enhancer Scope Magnification Doubler w/ Tube Mount, 2x40mm

Double the magnification power of your current optic by using the TRYBE Optics Enhancer™ Scope Magnification Doubler! TURN YOUR 1-4x INTO A 2-8x, YOUR 1-8x INTO A 2-16x and MORE simply by installing the TRYBE Optics Enhancer™ in front of your favorite straight tube Rifle Scope.

This 2x magnification increase doubles your target? size and allows for the most precise shot placement possible, all while keeping your favorite shooting system completely unaltered. The TRYBE Optics Enhancer™ Scope Magnification Doubler perfectly complements riflescopes with a 30mm or 1 in. objective lens diameter for one model, and 34mm objective lens diameter for the other model, and it seamlessly attaches to your existing scope without requiring any modifications to your weapon platform. A 2x Enhancer™ with both mounts is also available for you to use with scopes of different tube sizes! This way if you decide to switch between scopes, the Enhancer™ is timed to both mounts. So, if you change from a 30mm/1 in. scope to a 34mm scope, you've already got the mount you need!

The TRYBE 2x Enhancer™ has its own windage and elevation adjustments, so you'll never need to fidget around with your current scope settings. With enhanced magnification, you'll deliver more precise shots on target and gain the ability to accurately compare different bullet weights and types while at the range.

These magnifiers are made with Extra-low Dispersion (ED) glass and complete with a proprietary "Diamond Bright" coating that delivers the most crisp and clear?s with reduced glare and maximum brightness. Plus, these coatings create a scratch-resistant surface for use in harsh environments. Using the Enhancer™ will not negatively affect your current light transmission rate, and neither will it impact your field of view (FOV) any more than a standard double magnification scope.

So, what does this all mean for you? It means you get to create a more versatile riflescope that can double its magnification on the fly without negatively impacting your sighting experience. The TRYBE Enhancer™ has a 40mm objective lens, weighs only 8 ounces, and is just over 3 inches in length, so you'll barely even notice it when mounted on your favorite riflescope. Oh, and it's also waterproof, fog proof and shockproof, so feel free to use it in poor weather conditions and on powerful firearm calibers without worry.

Get your TRYBE Optics Enhancer™ Scope Magnification Doubler today to upgrade your riflescope and achieve fine-tuned precision in the field. And get ready to JOIN. THE. TRYBE.

Note: Since the Enhancer™ doubles your magnification, Bullet Drop Compensator (BDC) and ranging reticles will appear to be halved. The Enhancer™ works best when your center aiming point is utilized.

Mounting Instructions

1. Slide the precision mount portion of the Enhancer™ onto the end of your scope tube, align to horizontal, and tighten mount screws evenly to 15 inch-pounds, or just snug. This is secure enough to remain perfectly stationary through high recoil and abusive handling;
2. Adjust the Enhancer's™ elevation and windage screws to achieve the same zero as your riflescope, as the initial installation of the Enhancer™ may change your existing point of impact. Zeroing may be done by shooting your rifle and sighting in as with any newly mounted optic, utilizing only the Enhancer's™ own elevation and windage adjustments. A laser boresight may facilitate this. The graduations around the adjustment dials represent 4 MOA, or 4 inches at 100 yards. Remember, your existing riflescope's zero never needs to be touched. An additional locking turret screw is utilized on the Enhancer™ to ensure solid adjustments through recoil and handling abuse. Loosen the screw before adjusting the turrets and lock before shooting. This locking screw requires minimal pressure. Do not overtighten;
3. Confirm the same zero by shooting with the Enhancer™ installed as well as removed;
4. You may consider using your Enhancer™ with a second zero, or an "Enhanced" zero. Some users sight in their Enhancer™ a bit high to compensate for longer trajectories

Features:

• Two-Piece System with a High-Definition/Extra-low Dispersion HD/ED Lens
• Precision Mount to Attach to Your Existing Riflescope Tube
• Requires No Modification to Existing Firearm Platform
• Windage and Elevation Adjustments
• Proprietary "Diamond Bright" Coatings for Maximum Light Transmission, Glare Reduction, and Scratch Resistance
• Does Not Affect Field of View Any More Than a Standard Double Magnification Scope
• Adjustable Turrets: Yes, up to +/-10 MOA
• Locking Turrets: Yes
• Turret Style: Coin
• Off-Axis Adjustment Range: +/- 10 MOA

WARNING: California`s Proposition 65

This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.